Solution to Solar Lamp Failure-Chinnsun

Company news Industry information Common problem

Solution to Solar Lamp Failure

The solution to the problem is as follows:

1. If the solar lamp does not work because the bulb is damaged, replace the bulb.

2. If the battery is damaged and the solar lamp does not work, you can use a universal tester to test the voltage. If the voltage is not within the normal range, the battery is damaged and needs to be replaced.

3. When the solar lamp was installed for the first time, it turned on for a while and then subsided and never turned on again. In this case, it is likely that the positive and negative electrodes of the solar lamp battery are connected inversely.

4. If the line is abnormal, it will not light up. We need to check the line to see if it is disconnected, if the line head is loosened or worn, and if so, just reconnect the line and wrap the connector with insulating tape to avoid the sun energy lamp not lighting up.

Previous：LED Advantages
Next：No！

Return